15:00:08 <pwhalen> #startmeeting Fedora ARM and AArch64 Status Meeting
15:00:08 <zodbot> Meeting started Tue May 17 15:00:08 2016 UTC.  The chair is pwhalen. Information about MeetBot at http://wiki.debian.org/MeetBot.
15:00:08 <zodbot> Useful Commands: #action #agreed #halp #info #idea #link #topic.
15:00:08 <zodbot> The meeting name has been set to 'fedora_arm_and_aarch64_status_meeting'
15:00:08 <pwhalen> #chair pwhalen bconoboy pbrobinson dgilmore hrw jsmith dmarlin yselkowitz jonmasters ahs3
15:00:09 <zodbot> Current chairs: ahs3 bconoboy dgilmore dmarlin hrw jonmasters jsmith pbrobinson pwhalen yselkowitz
15:00:23 <pwhalen> morning folks! whos here today?
15:00:30 * pbrobinson o/
15:01:31 <linuxmodder> .hello linuxmodder
15:01:32 <zodbot> linuxmodder: linuxmodder 'Corey W Sheldon' <sheldon.corey@openmailbox.org>
15:01:47 <linuxmodder> but not for long
15:01:56 <yselkowitz> .hello yselkowitz
15:01:59 <zodbot> yselkowitz: yselkowitz 'Yaakov Selkowitz' <yselkowi@redhat.com>
15:02:04 <linuxmodder> have to leave by 1130 (1530 utc)
15:02:23 <pbrobinson> linuxmodder: we're normally done by then
15:03:09 <pwhalen> thanks for coming folks, hrw mentioned he would be a little late. lets get started
15:03:17 <dgilmore> hola
15:03:19 <pwhalen> #topic 1) ==== Package Status & Issues  ====
15:03:26 <pwhalen> morning dgilmore
15:03:53 <pbrobinson> so we should have the grub2/shim issue closed out today \o/
15:04:31 <pbrobinson> I need to bootstrap, I tried it a few days ago but it seems I left it too long and I need to bash harder at it. Plan on doing that today/tomorrow
15:04:40 <pwhalen> ive installed on mustang, rebooted ok.. just need to double check i used the right grub2 (but i think i did) will check on seattle, qemu shortly
15:04:42 <pbrobinson> libreoffice should be fixed
15:05:17 <pbrobinson> f24 stats are: statistics: {'older': 26, 'local_only': 0, 'remote_only': 302, 'same': 17803, 'newer': 3, 'total_missing_builds': 64}
15:05:24 <pbrobinson> so we're looking very good!
15:05:43 <pwhalen> #info f24 statistics: {'older': 26, 'local_only': 0, 'remote_only': 302, 'same': 17803, 'newer': 3, 'total_missing_builds': 64}
15:05:47 <pwhalen> nice
15:05:58 <pwhalen> #info libreoffice should be fixed.
15:06:01 <pbrobinson> and a bunch of the older will go once we have libreoffice cleaned up over the next couple of days with luck
15:06:31 <coremodule> .hello coremodule
15:06:32 <pwhalen> any new problem packages?
15:06:34 <zodbot> coremodule: coremodule 'Geoffrey Marr' <gmarr@redhat.com>
15:07:12 <pbrobinson> not that I'm aware of
15:08:49 <pwhalen> cool. anyone aware of any other problem packages we should be discussing?
15:09:36 <pwhalen> #topic 2) ==== Kernel Status ====
15:09:47 <pwhalen> #info kernel-4.6.0-1.fc25
15:09:47 <pwhalen> #link http://koji.fedoraproject.org/koji/buildinfo?buildID=765346
15:09:47 <pwhalen> #link http://arm.koji.fedoraproject.org/koji/buildinfo?buildID=374519
15:10:09 <pbrobinson> so 4.6 has gone GA, at some point soon we'll have a f24 stabilisation branch for it. In the mean time let me know of issues so I can track them
15:10:28 <pbrobinson> I know of a crash in omap-aes and that's it ATM
15:11:23 <pwhalen> #info Basic kernel testing complete on Beaglebone White, Cubietruck/Banana Pi, Trimslice and Jetson TK1
15:12:28 <pwhalen> #info Kernel 4.6 looking good so far, please test and report issues to the list.
15:12:40 <pbrobinson> so as always please test 4.5.x kernels and the 4.6 kernel, rawhide is already headed to 4.7
15:12:55 <pwhalen> any other kernel news?
15:13:14 <pbrobinson> only interesting thing so far for 4.7 on aarch64 is numa support has landed, if only we had useful numa platforms with upstream kernel support I might care ;-)
15:14:50 <pbrobinson> but that's mostly it for me.
15:15:01 <pwhalen> ok, moving on..
15:15:34 <pwhalen> #topic 3) ==== Bootloader Status ====
15:15:45 <pwhalen> #info shim-unsigned-aarch64-0.9-1.fc24
15:15:45 <pwhalen> #link http://arm.koji.fedoraproject.org/koji/taskinfo?taskID=3549209
15:16:20 <pwhalen> mustang seems okay now, I'll test seattle and qemu shortly, be great for others to test as well.
15:16:23 <pbrobinson> it will be in tomorrow's nightly
15:16:54 <pwhalen> nice, so should also fix the issue for cloud
15:16:56 <pbrobinson> I'll update all the various BZ, emails, threads etc when I can confirm it in the morning
15:17:48 <pwhalen> #info uboot-tools-2016.05-1.fc25
15:17:48 <pwhalen> #link http://koji.fedoraproject.org/koji/buildinfo?buildID=765658
15:18:02 <pbrobinson> also the tianocore uEFI firmware is on it's way to f24 in updates-testing too http://arm.koji.fedoraproject.org/koji/buildinfo?buildID=373605
15:18:04 <pwhalen> is also out and needs testing
15:18:30 <pbrobinson> I've tested it on the Bone Black and it looks good, will test the rest I have over the next couple of days
15:18:57 <pwhalen> nice! i'll take a look as well, good to have an official build. also will edit doc's when confirmed working
15:19:39 <pbrobinson> great
15:20:16 <pwhalen> #info fedora built Tianocore firmware available now for qemu, please test and report issues.
15:20:28 <pwhalen> #link http://arm.koji.fedoraproject.org/koji/buildinfo?buildID=373605
15:21:25 <pwhalen> think thats about it for bootloaders. Can anyone think of anything else they'd like to add?
15:21:56 <pwhalen> Many thanks to pjones for working on shim for us.
15:22:13 <pwhalen> #topic 4) ==== F24 Final ====.
15:22:58 <pwhalen> #info Freeze is scheduled for 2016-05-31
15:23:09 <pbrobinson> so I think now with the grub2/shim issue fixed we're looking pretty good
15:23:21 <pwhalen> #info Fedora 24 Final Release (GA): 2016-06-14
15:23:28 <pwhalen> agreed!
15:23:32 <pbrobinson> I'm working to get the disk images working with a non GPT partition in time for GA/freeze
15:23:58 <pbrobinson> anyone else aware of issues?
15:24:08 <pwhalen> cool, is there anything else to be done for final? something not work well in Beta?
15:24:25 <pbrobinson> please report them to rhbz, #fedora-arm or the mailing list so we're aware of them
15:25:05 <pwhalen> #info Please report issues to rhbz, #fedora-arm or the mailing list.
15:26:02 <pwhalen> #topic 5) == Open Floor ==
15:26:58 <pwhalen> anythign else folks?!
15:29:03 <dgilmore> I attempted to get the CHIP running fedora
15:29:28 <pwhalen> i saw, and some upstream patches for it
15:29:31 <dgilmore> I was able to use FEL to send a fedora u-boot and boot from a usb stick, but wifi support is not upstream
15:29:54 <dgilmore> there was a patch needed for u-boot to enable the usb chicpset
15:30:16 <pwhalen> dgilmore, i understand you have virt working on the jetson tk1, did you build that yourself? doesnt work in upstream
15:30:30 <pwhalen> (uboot)
15:30:36 <dgilmore> it would work if you used a usb hub and a ethernet adapter
15:30:48 <dgilmore> pwhalen: yep, works fantastic
15:31:14 <pbrobinson> dgilmore: I've got some initial dracut patch, I'm just trying to check some other devices to see if I need anything else to sent it as once
15:31:14 <dgilmore> pwhalen: there is a u-boot environment value you have to set to enable it
15:31:41 <dgilmore> pbrobinson: cool, it was just a FYI thing for people not aware
15:31:47 <pbrobinson> dgilmore: the u-boot patch landed in 2016.05 GA
15:31:59 <pbrobinson> so we should be good there
15:31:59 <dgilmore> pbrobinson: excellent, just need nand support
15:32:23 <pwhalen> dgilmore, ok, is it enabled in our uboot?
15:32:26 <dgilmore> or some way to figure out how to write u-boot to nand
15:32:34 <pbrobinson> yes, nand support is being worked on but even in the kernel it's truly terrible
15:32:38 <dgilmore> pwhalen: virt on the jetson
15:33:16 <pbrobinson> dgilmore: I'm trying to work out how to get the developer working on the mac80211 realtek driver some devices with SDIO wifi versions, he's just working on usb ATM
15:33:18 <pwhalen> yes, i use upstream on thejetson, so its not working
15:33:54 <pbrobinson> dgilmore: the other possible way is usb-gadget ethernet over the micro USB port too
15:33:55 <dgilmore> pwhalen: it works
15:34:02 <dgilmore> you need to set a variable
15:34:17 <dgilmore> pbrobinson: g_ether is missing
15:34:54 <dgilmore> pwhalen: at a u-boot prompt run
15:34:54 <pbrobinson> dgilmore: weird, it never use to be (I've used it on BBone) so I'll check to see what changed as there's been churn in gadget stack
15:35:01 <dgilmore> setenv bootm_boot_mode nonsec
15:35:04 <dgilmore> saveenv
15:35:11 <dgilmore> then boot a lpae kernel
15:35:16 <hrw> o/
15:35:17 <pbrobinson> might be worth documenting that somewhere
15:35:34 <dgilmore> pbrobinson: yeah
15:35:37 <pwhalen> very nice! thanks dgilmore..ill update the wiki for sure
15:35:39 <dgilmore> hey hrw
15:35:58 <pwhalen> i saw others asking on the nvidia forums too, so good to know
15:36:12 <dgilmore> pwhalen: my jetson is building the fedora docker base images for now
15:36:24 <dgilmore> that uses virt to do so
15:36:41 <dgilmore> I do have a 1T sshd on it
15:37:00 <pwhalen> cool..CPU: All CPU(s) started in HYP mode. :)
15:37:08 <pbrobinson> 1T sshd... must be a mem leak ;-)
15:37:45 <dgilmore> its a seagate hybrid drive, 1T spinning disk and 8G of nand
15:38:18 <dgilmore> the firmware is supposed to use the nand to make it work kinda like a ssd
15:39:07 <pbrobinson> dgilmore: you missed the joke on sshd ;-)
15:39:09 <dgilmore> pwhalen: I have found virt to be much more stable on the jetson than the cubietruck
15:39:23 <dgilmore> pwhalen: :P
15:39:26 <dgilmore> pbrobinson: :P
15:39:51 <hrw> virt...
15:39:58 <dgilmore> hrw: yes sir
15:39:59 <hrw> live is so much easier with working virt
15:39:59 <pwhalen> dgilmore, nice, ive been using it on the bpi, which is likely about the same. works decently enough, resource constrained
15:40:30 <hrw> for linaro work I use centos7 on pinkiepie with several debian/jessie debian/sid centos7 fedora vms
15:41:14 <pwhalen> sad its not fedora anymore, alas..
15:41:44 <pwhalen> anything else for today folks?
15:41:46 <pbrobinson> hrw: I think we should have completely working virt with f24 now we have the shippable uEFI firmware
15:42:02 <dgilmore> pbrobinson: that would be nice
15:42:20 <pbrobinson> hrw: as usual any feedback welcome if you see issues, we should have you qemu images tomorrow
15:42:57 <pwhalen> #endmeeting